Introducing the BAK Revolver X4, featuring the same great features of the Revolver X2, now with a stylish matte black finish. When closed, heavy-duty aluminum slats secure the cover the full length of the bed on both sides, providing unrivaled strength and security. When opened, the cover rolls up tight providing full bed access without blocking rear view mirror and third brake light visibility.
All-new matte finish vinyl, side rails and seals give the Revolver X4 a stylish matte finish and complement your truck's OEM features.
The RX4 is constructed of heavy-duty aluminum panels. When latched, the ¾” Patented Rotational Locking Rails secure the cover the entire length of the truck bed. Heavy-duty locking levers are now 3X thicker with reinforced gussets for added strength, and are engineered to lock with no adjustment necessary.
The Revolver X4 rolls up tight providing 100% bed access without blocking rear view visibility or the third brake light.
No lifting required. The cover can easily be rolled open and closed with one-handed operation from either side of the truck.
Revolver X4 sits flush with your bed rail caps providing a low-profile look that complements your truck.
BAK® Industries (“BAK”) warrants your Revolver X4 hard rolling truck bed cover to be structurally free from defects in material and workmanship for 3 Year Limited Warranty period from the retail date of purchase. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty service. Warranty is nontransferable and applies to the original purchaser of the BAK product only.
BAK reserves the right to determine whether a product needs to be repaired or replaced. No labor or service allowance is given or implied. The warranty will be void if the product has been damaged by accident, unreasonable use, neglect, improper service/installation/removal, modifications, acts of God or normal wear and tear or other causes not arising out of defective materials or workmanship. BAK assumes no liability for injury, loss, incidental or consequential damages. BAK reserves the right to substitute an entire replacement system or provide other remedies than those listed in this warranty for discontinued products or other reasons. Shipping charges will apply for any repair or replacement.
BAK is committed to providing you with our best service at all times. Please feel free to contact us should you require any assistance with your BAK product.
These stylish covers incorporate OE marine grade vinyl laminated on the top surfaces. Standard automotive soap and water used with a soft sponge or cloth is recommended for cleaning. Shammy dry to prevent water spots and ensure a rich dark finish.
3M 303 Aerospace Protectant may be used to keep the vinyl surface clean and protected from the elements and will also remove any water spots that may have developed. 303 Aerospace not only protects against fading, discoloration and cracking from harmful UV rays, but repels dust and stains. Simply spray on and wipe dry for a beautiful, matte finish that protects your cover from road grime and dust.
It is recommended that you periodically check your cover is securely attached to your truck bed. Inspect the clamps and front mounting bolts to ensure they were properly installed and have not come loose or knocked out of adjustment during operation. Covers that are used with high frequency or that are subject to the vibrations and impact from rough roadways can cause the cover to require adjustment.
It is recommended that you periodically inspect and service the latches on each panel. Clean away any excess dirt or grime and lubricate with silicone spray. Ensure the latches move freely in and out to properly engage the side rail and provide proper performance with optimum security. Be careful not to overspray the cover. Wipe away any excess around the latch location.
Please make use of the Revolver X4 Hard Rolling Tonneau Covers installation instructions below to assist you with the installation of your Revolver X4 Hard Rolling Tonneau Covers. You will find both printed installation instructions as well as installation videos to help guide you through the simple process.
If you have further questions or need technical assistance with the install of any Revolver X4 Hard Rolling Tonneau Covers, please call one of our knowledgeable installation experts at 818-365-9000 or Contact Us and we will be happy to assist you.
Installation guides and instructions for vehicles sold in U.S. and Canada
Installation guides and instructions for international vehicles sold outside the U.S. and Canada
The Revolver X4 application guide will assist you in identifying the Revolver X4 hard rolling tonneau cover that is made for your pick-up truck. Please feel free to select the Revolver X4 application that is right for you by making use of the make, year, model and truck bed size of your truck.
If you have questions about which Revolver X4 truck bed cover is the best fit for your truck, please call us at 818-365-9000 or Contact us and we will be happy to assist you.
Mon-Fri: 5:30am - 4pm PST