Much like the BakFlip, the Roll-X is a rock solid hard tonneau cover that gives you full unobstructed use of your entire truck bed. It offers all the advantages of a soft cover, while providing all the attributes of a hard tonneau cover. If you're in the market for a solid, robust, all season tonneau cover that performs as well as it looks, the Roll-X hard rolling truck bed cover is built for you.
The Roll-X has a sleek, no-profile look that is very easy to use.
The Roll-X is strong and durable, built to outlast the lifetime of your truck.
3/8" locking rails ensure the entire cover is locked down from the cab to the tailgate on both sides of the bed.
The Roll-X mounts flush with the bed of your truck, and allows for use of other accessories.
No drilling required. The Roll-X can be installed in about 15 minutes with the use of a 15mm wrench.
BAK® Industries (“BAK”) warrants your Roll-X Hard Rolling Tonneau Covers Overview to be structurally free from defects in material and workmanship for 1 Year Limited Warranty in the table below from the retail date of purchase. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty service. Warranty is nontransferable and applies to the original purchaser of the BAK product only.
BAK reserves the right to determine whether a product needs to be repaired or replaced. No labor or service allowance is given or implied. The warranty will be void if the product has been damaged by accident, unreasonable use, neglect, improper service/installation/removal, modifications, acts of God or normal wear and tear or other causes not arising out of defective materials or workmanship. BAK assumes no liability for injury, loss, incidental or consequential damages. BAK reserves the right to substitute an entire replacement system or provide other remedies than those listed in this warranty for discontinued products or other reasons. Shipping charges will apply for any repair or replacement.
BAK is committed to providing you with our best service at all times. Please feel free to contact us should you require any assistance with your BAK product.
These stylish covers incorporate OE marine grade vinyl laminated on the top surfaces. Standard automotive soap and water used with a soft sponge or cloth is recommended for cleaning. Shammy dry to prevent water spots and ensure a rich dark finish.
3M 303 Aerospace Protectant may be used to keep the vinyl surface clean and protected from the elements and will also remove any water spots that may have developed. 303 Aerospace not only protects against fading, discoloration and cracking from harmful UV rays, but repels dust and stains. Simply spray on and wipe dry for a beautiful, matte finish that protects your cover from road grime and dust.
It is recommended that you periodically check your cover is securely attached to your truck bed. Inspect the clamps and front mounting bolts to ensure they were properly installed and have not come loose or knocked out of adjustment during operation. Covers that are used with high frequency or that are subject to the vibrations and impact from rough roadways can cause the cover to require adjustment.
It is recommended that you periodically inspect and service the latches on each panel. Clean away any excess dirt or grime and lubricate with silicone spray. Ensure the latches move freely in and out to properly engage the side rail and provide proper performance with optimum security. Be careful not to overspray the cover. Wipe away any excess around the latch location.
Warranty registration and factory support is only available for BAK Industries products purchased as new through an Authorized BAK Industries dealer.
Products purchased at discounted rates on auction sites such as Ebay and Craigslist, to name a few, will not be covered under factory warranty under any circumstance. BAK Industries is unable to verify whether products sold through Auction Sites are new, used, or refurbished, and as such, we are unfortunately unable to warranty such purchases. We advise using caution when buying through auction sites as you'll be doing so at your own risk.
Please feel free to make use of the Roll-X Hard Rolling Tonneau Covers Overview hard folding tonneau cover installation instructions below to assist you with the installation of your Roll-X Hard Rolling Tonneau Covers Overview truck bed cover. You will find both printed installation instructions as well as installation videos to help guide you through the simple process.
If you have further questions or need technical assistance with the install of any Roll-X Hard Rolling Tonneau Covers Overview truck bed cover, please call one of our knowledgable installation experts at 818-365-9000 or Contact us and we will be happy to assist you.
Installation guides and instructions for vehicles sold in U.S. and Canada
Installation guides and instructions for international vehicles sold outside the U.S. and Canada
The Roll-X Hard Rolling Tonneau Covers Overview application guide will assist you in identifying the Roll-X Hard Rolling Tonneau Covers Overview hard folding tonneau cover that is made for your pick-up truck. Please feel free to select the Roll-X Hard Rolling Tonneau Covers Overview application that is right for you by making use of the make, year, model and truck bed size of your truck.
If you have questions about which Roll-X Hard Rolling Tonneau Covers Overview truck bed cover is the best fit for your truck, please call us at 818-365-9000 or Contact us and we will be happy to assist you.
Mon-Fri: 5:30am - 4pm PST