2015 F150 BAKFlip Installation Bulletin

This product bulletin is applicable to all 2015 Ford F150 BAKFlip models only.

In order to perform a correct installation of your BAKFlip tonneau cover, please pay close attention to the following installation bulletin. This bulletin is applicable to all 2015 Ford F150 BAKFlip models only.

BAKFlip Model BAKFlip Part #
G2 Model Part Numbers:26327, 26328, 26329
HD Model Part Numbers:35327, 35328, 35329
FiberMax Model Part Numbers:126327, 126328, 126329
F1 Model Part Numbers:72327, 72328, 72329
VP Model Part Numbers:162327, 162328, 162329
CS Model Part Numbers:26327BT, 26328BT, 26329BT
CS/F1 Model Part Numbers:72327BT, 72328BT, 72329BT

All necessary installation hardware, including angle shims, should have been included with your tonneau cover kit. If you are missing any components please contact BAK Customer Service at 818-365-9000 or support@bakindustries.com for urgent delivery.

Tech Tip 1:

  • Check the rails. If there is a shim installed flush with the top edge of the BAKFlip rail, as shown, then no additional shimming should be necessary. Proper shim use ensures the rail clamps squarely to your truck allowing proper cover fitment.
  • Without the use of these necessary angel shims the cover may appear to be too narrow.
  • If there is no shim on the rails use a pack of 6” shims and apply 5 of them evenly spaced along the top edge of each rail.
2015 Ford F150 BAKFlip Shin PLacement

Tech Tip 2:

Check cover width, it should measure between 61 ½” and 61 5/8” from the underside of the cover from rubber to rubber. Should your cover be narrower than these dimensions then additional spacer shims are available from BAK Customer Service at 818-365-9000 or support@bakindustries.com for urgent delivery.

2015 Ford F150 BAKFlip Cover Width

 

Download 2015 F150 BAKFlip Install Bulletin